Thrunite Ti3 v2 (2018) review

Cree XP-G2 LED
120 lm output
625 cd intensity
1 x AAA battery

The Thrunite Ti3 v2 (TI3V2) released in 2018. It uses Cree XP-G2 LED, OP reflector and 1 x AAA battery. The powerful emitter in this flashlight provides up to 120 lm output, 625 cd intensity, and a beam distance of 50 m.

This light has 3 modes of lighting. This light does not have memory function. It has a strobe function, which is one of the most effective self defense tools available.

Table of contents:

Thrunite Ti3 v2 (TI3V2) specifications

NameTi3 v2
Rated 3/5 based on 1033 user votes.


The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.

Weight15 g
Length67 mm
Body diameter14 mm
Head diameter14 mm
Materialaluminium alloy with HAIII hard-anodized finish


The emitter of Ti3 v2 manufactured by Cree, a US-based LED manufacturing company. The Ti3 v2 has an orange peel (OP) textured reflector. Orange peel reflectors have smoother beams. It has an AR coated lens.

EmitterCree XP-G2 LED
Color temperature5000 K, 6500 K
Lenstoughtened AR coated glass


The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.

Flux120 lm
Intensity625 cd
Throw50 m
CD/LM factor5.21


The Ti3 v2 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.

Modes3 modes
Mode memoryno
Ramping modeno


The Ti3 v2 cannot charge batteries directly. You may need an external charger to keep your battery going. A protected battery is recommended as the light itself does not have low voltage protection (LVP). This light does not have temperature control feature.

Battery1 x AAA battery
Battery indicatorno
Charger portno
Thermal regulationno

The performance of the Thrunite Ti3 v2 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Thrunite Ti3 v2, then don’t hesite and signal the problem to us.

Thrunite Ti3 v2 (TI3V2) pictures

Thrunite Ti3 v2 / TI3V2 photo Thrunite Ti3 v2 / TI3V2 photo Thrunite Ti3 v2 / TI3V2 photo Thrunite Ti3 v2 / TI3V2 photo Thrunite Ti3 v2 / TI3V2 photo
Thrunite Ti3 v2 / TI3V2

Thrunite Ti3 v2 (TI3V2) comparisons

According to our statistics, the Thrunite Ti3 v2 flashlight was most often compared on our site with the following flashlights.

Olight I3E EOS
Olight I3E EOS
vs Thrunite Ti3 v2
Thrunite Ti3 v2
Thrunite Ti3 v2
Thrunite Ti3 v2
vs Lumintop GT3 Mini
Lumintop GT3 Mini
Thrunite Ti3 v2
Thrunite Ti3 v2
vs Lumintop EDC AA
Lumintop EDC AA
Olight I3S EOS
Olight I3S EOS
vs Thrunite Ti3 v2
Thrunite Ti3 v2

If there’s information about the Thrunite Ti3 v2 that you would like to see on this site, then write to us.

FlashlightChart.com / Flashlights / Thrunite / Thrunite Ti3 v2 (2018)
Back to Top