
Thrunite TH10 v2 (2018) review
The Thrunite TH10 v2 (TH10V2) released in 2018. It uses Cree XHP35 HI LED, SMO reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this headlamp provides up to 2100 lm output, 23600 cd intensity, and a beam distance of 307 m.
This light has 6 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. The TH10 v2 flashlight is rechargeable easily via USB port.
Table of contents:
Thrunite TH10 v2 (TH10V2) specifications
- Brand
- Thrunite
- Name
- TH10 v2
- Type
- TH10V2
- Rating
- Launch
- 2018
- Form
- headlamp
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 71 g
- Length
- 107 mm
- Body diameter
- 24 mm
- Head diameter
- 28.5 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
System
The emitter of TH10 v2 manufactured by Cree, a US-based LED manufacturing company. The TH10 v2 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Emitter
- Cree XHP35 HI LED
- Color temperature
- 6500 K
- Reflector
- SMO
- Lens
- toughtened AR coated glass
- Switch
- electronic front
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 2100 lm
- Intensity
- 23600 cd
- Throw
- 307 m
- CD/LM factor
- 11.24
Software
The TH10 v2 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- Modes
- 6 modes
- Mode memory
- yes
- Ramping mode
- no
- Strobe
- no
- SOS/Beacon
- yes
Features
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- Battery
- 1 x 18650 Li-Ion battery
- Battery indicator
- yes
- Charger port
- microUSB
- LVP
- yes
- Thermal regulation
- yes
- Protection
- IPx8
- AUX LEDs
- no
- Magnetic
- no
Accessories
It comes with a battery. The battery must be fully charged before you first use your TH10 v2. The clip is useful to keep the light secured in your pocket.
- Package contents
- 18650 battery
2 x spare o-rings
clip
headband
microUSB cable
rubber slot
The performance of the Thrunite TH10 v2 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Thrunite TH10 v2, then don’t hesite and signal the problem to us.
Thrunite TH10 v2 (TH10V2) pictures

If there’s information about the Thrunite TH10 v2 that you would like to see on this site, then write to us.