FlashlightChart.com / Flashlights / Thrunite / Thrunite T1 (2019)

Thrunite T1 (2019) review

2019
Cree XHP50 LED
1500 lm output
2600 cd intensity
1 x 18350 Li-Ion battery

The Thrunite T1 (T1) released in 2019. It uses Cree XHP50 LED, SMO reflector and 1 x 18350 Li-Ion battery. The powerful emitter in this flashlight provides up to 1500 lm output, 2600 cd intensity, and a beam distance of 102 m.

The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.

Table of contents:

Thrunite T1 (T1) specifications

Brand
Thrunite
Name
T1
Type
T1
Rating
Rated 3/5 based on 163 user votes.
Thanks for rating!
Invalid rating.
Launch
2019
Form
flashlight

Body

The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.

Weight
45 g
Length
69.5 mm
Body diameter
22 mm
Head diameter
26.5 mm
Material
aluminium alloy with HAIII hard-anodized finish
Colors
black
desert tan

System

The emitter of T1 manufactured by Cree, a US-based LED manufacturing company. The T1 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better.

Emitter
Cree XHP50 LED
Color temperature
6500 K / 5000 K
Reflector
SMO
Lens
glass
Switch
electronic side

Performance

The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.

Flux
1500 lm
Intensity
2600 cd
Throw
102 m
CD/LM factor
1.73

Software

The T1 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The ramping mode of the T1 is intuitive, and lets you seamlessly ramp the output up and down over almost the entire output range. The T1 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.

Mode memory
yes
Ramping mode
yes
Strobe
yes
SOS/Beacon
no

Features

The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating. The T1 is magnetic so that the flashlight can be attached to some metallic surfaces.

Battery
1 x 18350 Li-Ion battery
Battery indicator
yes
Charger port
yes
LVP
yes
Thermal regulation
yes
Protection
IPx8
AUX LEDs
no
Magnetic
yes

Accessories

It comes with a battery. The battery must be fully charged before you first use your T1. The clip is useful to keep the light secured in your pocket. The lanyard prevents accidental loss of the flashlight.

Package contents
18350 battery
2 x spare o-rings
clip
lanyard
microUSB cable
spare rubber cover

The performance of the Thrunite T1 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Thrunite T1, then don’t hesite and signal the problem to us.

Thrunite T1 (T1) pictures

If there’s information about the Thrunite T1 that you would like to see on this site, then write to our webmaster@flashlightchart.com address.

Back to Top
This website uses cookies which are small data files that it creates and stores on your computer. If you use this website, you agree with our cookies policy. More information