
Ledlenser MT10 (2018) review
The Ledlenser MT10 (MT10) released in 2018. It uses Xtreme LED, SMO reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 1000 lm output, 8100 cd intensity, and a beam distance of 180 m.
This light has 3 modes of lighting. This light does not have memory function. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
Ledlenser MT10 (MT10) specifications
- Brand
- Ledlenser
- Name
- MT10
- Type
- MT10
- Rating
- Launch
- 2018
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 110 g
- Length
- 128 mm
- Body diameter
- 27 mm
- Head diameter
- 32 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
System
The MT10 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better.
- Emitter
- Xtreme LED
- Color temperature
- 6000 K
- Reflector
- SMO
- Lens
- convex
- Switch
- electronic side
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 1000 lm
- Intensity
- 8100 cd
- Throw
- 180 m
- CD/LM factor
- 8.1
- CRI
- 65
Software
The MT10 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.
- Modes
- 3 modes
- Mode memory
- no
- Ramping mode
- no
- Strobe
- yes
- SOS/Beacon
- no
Features
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- Battery
- 1 x 18650 Li-Ion battery
- Battery indicator
- yes
- Charger port
- yes
- LVP
- yes
- Thermal regulation
- yes
- Protection
- IP54
- AUX LEDs
- no
- Magnetic
- no
- Specials
- focusable
Accessories
It comes with a battery. The battery must be fully charged before you first use your MT10. The package includes a holster to safely store your flashlight. The clip is useful to keep the light secured in your pocket. The lanyard prevents accidental loss of the flashlight.
- Package contents
- 18650 battery
clip
lanyard
leather holster
microUSB cable
The performance of the Ledlenser MT10 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Ledlenser MT10, then don’t hesite and signal the problem to us.
Ledlenser MT10 (MT10) pictures

If there’s information about the Ledlenser MT10 that you would like to see on this site, then write to us.