FlashlightChart.com / Flashlights / Thrunite / Thrunite TH20 (2016)

Thrunite TH20 (2016) review

2016
Cree XP-L V6 LED
250 lm output
1120 cd intensity
1 x 14500 Li-Ion battery

The Thrunite TH20 (TH20) released in 2016. It uses Cree XP-L V6 LED, OP reflector and 1 x 14500 Li-Ion battery. The powerful emitter in this headlamp provides up to 250 lm output, 1120 cd intensity, and a beam distance of 67 m.

This light has 4 modes of lighting. The memory function is a nice feature, the light will remember the last used mode.

Table of contents:

Thrunite TH20 (TH20) specifications

Brand
Thrunite
Name
TH20
Type
TH20
Rating
Rated 3/5 based on 143 user votes.
Thanks for rating!
Invalid rating.
Launch
2016
Form
headlamp

Body

The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.

Weight
76 g
Length
70 mm
Body diameter
24.5 mm
Head diameter
24.5 mm
Material
aluminium alloy with HAIII hard-anodized finish
Colors
black

System

The emitter of TH20 manufactured by Cree, a US-based LED manufacturing company. The TH20 has an orange peel (OP) textured reflector. Orange peel reflectors have smoother beams. It has an AR coated lens.

Emitter
Cree XP-L V6 LED
Color temperature
5000 K, 6500 K
Reflector
OP
Lens
AR coated glass
Switch
electronic front

Performance

The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.

Flux
250 lm
Intensity
1120 cd
Throw
67 m
CD/LM factor
4.48

Software

The TH20 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.

Modes
4 modes
Mode memory
yes
Ramping mode
no
Strobe
no
SOS/Beacon
yes

Features

The TH20 cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. This light does not have temperature control feature.

Battery
1 x 14500 Li-Ion battery
Battery indicator
no
Charger port
no
LVP
yes
Thermal regulation
no
Protection
IPx8
AUX LEDs
no
Magnetic
no

Accessories

Package contents
headband
rubber slot
spare o-ring

The performance of the Thrunite TH20 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Thrunite TH20, then don’t hesite and signal the problem to us.

Thrunite TH20 (TH20) pictures

If there’s information about the Thrunite TH20 that you would like to see on this site, then write to our webmaster@flashlightchart.com address.

Back to Top
This website uses cookies which are small data files that it creates and stores on your computer. If you use this website, you agree with our cookies policy. More information