Thrunite T10T v2 Cutlerylover (2020) review
The Thrunite T10T v2 Cutlerylover (T10TV2C) released in 2020. It uses Cree XP-L HD LED, OP reflector and 1 x 14500 Li-Ion battery. The powerful emitter in this flashlight provides up to 230 lm output, 832 cd intensity, and a beam distance of 58 m.
This light has 4 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
Thrunite T10T v2 Cutlerylover (T10TV2C) specifications
- T10T v2 Cutlerylover
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 40 g
- 87 mm
- Body diameter
- 19 mm
- Head diameter
- 19 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of T10T v2 Cutlerylover manufactured by Cree, a US-based LED manufacturing company. The T10T v2 Cutlerylover has an orange peel (OP) textured reflector. Orange peel reflectors have smoother beams. It has an AR coated lens.
- Cree XP-L HD LED
- Color temperature
- 5000 K, 6500 K
- toughtened AR coated glass
- electronic side
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 230 lm
- 832 cd
- 58 m
- CD/LM factor
The T10T v2 Cutlerylover has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The T10T v2 Cutlerylover is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.
- 4 modes
- Mode memory
- Ramping mode
The T10T v2 Cutlerylover cannot charge batteries directly. You may need an external charger to keep your battery going. A protected battery is recommended as the light itself does not have low voltage protection (LVP). This light does not have temperature control feature. The T10T v2 Cutlerylover is magnetic so that the flashlight can be attached to some metallic surfaces.
- 1 x 14500 Li-Ion battery
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
The clip is useful to keep the light secured in your pocket.
- Package contents
The performance of the Thrunite T10T v2 Cutlerylover flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Thrunite T10T v2 Cutlerylover, then don’t hesite and signal the problem to us.
Thrunite T10T v2 Cutlerylover (T10TV2C) pictures
If there’s information about the Thrunite T10T v2 Cutlerylover that you would like to see on this site, then write to us.