Thrunite TN12 v4 (2019) review
The Thrunite TN12 v4 (TN12V4) released in 2019. It uses Cree XP-L2 V6 LED, SMO reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 1100 lm output, 12800 cd intensity, and a beam distance of 226 m.
This light has 5 modes of lighting. This light does not have memory function. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
Thrunite TN12 v4 (TN12V4) specifications
- TN12 v4
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 86 g
- 143 mm
- Body diameter
- 25.4 mm
- Head diameter
- 25.4 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of TN12 v4 manufactured by Cree, a US-based LED manufacturing company. The TN12 v4 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Cree XP-L2 V6 LED
- Color temperature
- 6500 K
- toughtened AR coated glass
- electronic side, mechanical rear
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 1100 lm
- 12800 cd
- 226 m
- CD/LM factor
The TN12 v4 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.
- 5 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. The TN12 v4 cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. This light does not have temperature control feature.
- 1 x 18650 Li-Ion battery
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
The package includes a holster to safely store your flashlight. The clip is useful to keep the light secured in your pocket. The lanyard prevents accidental loss of the flashlight.
- Package contents
- 2 x spare o-rings
spare rubber cover
The performance of the Thrunite TN12 v4 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Thrunite TN12 v4, then don’t hesite and signal the problem to us.
Thrunite TN12 v4 (TN12V4) pictures
If there’s information about the Thrunite TN12 v4 that you would like to see on this site, then write to us.