FlashlightChart.com / Flashlights / Thrunite / Thrunite T2 (2020)

Thrunite T2 (2020) review

2020
Cree XHP70 LED
3757 lm output
6300 cd intensity
1 x 21700 Li-Ion battery

The Thrunite T2 (T2) released in 2020. It uses Cree XHP70 LED, SMO reflector and 1 x 21700 Li-Ion battery. The powerful emitter in this flashlight provides up to 3757 lm output, 6300 cd intensity, and a beam distance of 159 m.

This light has 5 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available. The T2 flashlight is rechargeable easily via USB port.

Table of contents:

Thrunite T2 (T2) specifications

Brand
Thrunite
Name
T2
Type
T2
Rating
Rated 3/5 based on 104 user votes.
Thanks for rating!
Invalid rating.
Launch
2020
Form
flashlight

Body

The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.

Weight
87 g
Length
112 mm
Body diameter
26 mm
Head diameter
30.5 mm
Material
aluminium alloy with HAIII hard-anodized finish
Colors
black

System

The emitter of T2 manufactured by Cree, a US-based LED manufacturing company. The T2 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better.

Emitter
Cree XHP70 LED
Color temperature
5000 K, 6500 K
Reflector
SMO
Lens
glass
Switch
electronic side

Performance

The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.

Flux
3757 lm
Intensity
6300 cd
Throw
159 m
CD/LM factor
1.68

Software

The T2 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The T2 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.

Modes
5 modes
Mode memory
yes
Ramping mode
no
Strobe
yes
SOS/Beacon
no

Features

The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.

Battery
1 x 21700 Li-Ion battery
Battery indicator
yes
Charger port
USB Type-C
LVP
yes
Thermal regulation
yes
Protection
IPx8
Impact resistance
1.5 m
AUX LEDs
no
Magnetic
no

Accessories

It comes with a battery. The battery must be fully charged before you first use your T2. The package includes a holster to safely store your flashlight. The clip is useful to keep the light secured in your pocket.

Package contents
2 x spare o-rings
21700 battery
USB Type-C cable
clip
nylon holster
spare USB plug

The performance of the Thrunite T2 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Thrunite T2, then don’t hesite and signal the problem to us.

Thrunite T2 (T2) pictures

If there’s information about the Thrunite T2 that you would like to see on this site, then write to our webmaster@flashlightchart.com address.

Back to Top
This website uses cookies which are small data files that it creates and stores on your computer. If you use this website, you agree with our cookies policy. More information