Thrunite TH01 (2019) review
The Thrunite TH01 (TH01) released in 2019. It uses Cree XHP50 LED, OP reflector and 1 x 18350 Li-Ion battery. The powerful emitter in this headlamp provides up to 1500 lm output, 4000 cd intensity, and a beam distance of 126 m.
This light has 5 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. The TH01 flashlight is rechargeable easily via USB port.
Table of contents:
Thrunite TH01 (TH01) specifications
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
|Body diameter||28.5 mm|
|Head diameter||33.6 mm|
|Material||aluminium alloy with HAIII hard-anodized finish|
The emitter of TH01 manufactured by Cree, a US-based LED manufacturing company. The TH01 has an orange peel (OP) textured reflector. Orange peel reflectors have smoother beams. It has an AR coated lens.
|Emitter||Cree XHP50 LED|
|Color temperature||5000 K, 6500 K|
|Lens||AR coated glass|
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
The TH01 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. This light does not have temperature control feature.
|Battery||1 x 18350 Li-Ion battery|
It comes with a battery. The battery must be fully charged before you first use your TH01. The clip is useful to keep the light secured in your pocket.
|Package contents||18350 battery|
spare USB plug
The performance of the Thrunite TH01 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Thrunite TH01, then don’t hesite and signal the problem to us.
Thrunite TH01 (TH01) pictures
Thrunite TH01 (TH01) comparisons
According to our statistics, the Thrunite TH01 flashlight was most often compared on our site with the following flashlights.
Haikelite HK04 XHP50.2
Olight S2R Baton II
If there’s information about the Thrunite TH01 that you would like to see on this site, then write to us.