
Speras T1 (2019) review
The Speras T1 (T1) released in 2019. It uses Osram KW CSLPM1.TG LED, SMO reflector and 2 x 18650 Li-Ion batteries. The powerful emitter in this flashlight provides up to 1200 lm output, 422500 cd intensity, and a beam distance of 1300 m.
This light has 4 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
Speras T1 (T1) specifications
- Brand
- Speras
- Name
- T1
- Type
- T1
- Rating
- Launch
- 2019
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 263.2 g
- Length
- 244 mm
- Body diameter
- 25.4 mm
- Head diameter
- 63.5 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
System
The emitter of T1 manufactured by Osram, a German lighting manufacturer. The T1 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Emitter
- Osram KW CSLPM1.TG LED
- Color temperature
- 6500 K
- Reflector
- SMO
- Lens
- toughtened AR coated glass
- Switch
- electronic side, mechanical rear
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 1200 lm
- Intensity
- 422500 cd
- Throw
- 1300 m
- CD/LM factor
- 352.08
Software
The T1 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The T1 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- Modes
- 4 modes
- Mode memory
- yes
- Ramping mode
- no
- Strobe
- yes
- SOS/Beacon
- yes
Features
The battery indicator lets you know when the battery is low, charging, or fully charged. The T1 cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- Battery
- 2 x 18650 Li-Ion batteries
- Battery indicator
- yes
- Charger port
- no
- LVP
- yes
- Thermal regulation
- yes
- Protection
- IPx8
- AUX LEDs
- no
- Magnetic
- no
Accessories
The package includes a holster to safely store your flashlight. The lanyard prevents accidental loss of the flashlight.
- Package contents
- 2 x spare o-rings
lanyard
nylon holster
The performance of the Speras T1 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Speras T1, then don’t hesite and signal the problem to us.
Speras T1 (T1) pictures

If there’s information about the Speras T1 that you would like to see on this site, then write to us.