FlashlightChart.com / Flashlights / Speras / Speras E1 Pro (2019)

Speras E1 Pro (2019) review

2019
Luminus SST40 LED
1700 lm output
20192 cd intensity
1 x 18650 Li-Ion battery

The Speras E1 Pro (E1PRO) released in 2019. It uses Luminus SST40 LED, SMO reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 1700 lm output, 20192 cd intensity, and a beam distance of 284 m.

This light has 3 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.

Table of contents:

Speras E1 Pro (E1PRO) specifications

Brand
Speras
Name
E1 Pro
Type
E1PRO
Rating
Rated 4/5 based on 153 user votes.
Thanks for rating!
Invalid rating.
Launch
2019
Form
flashlight

Body

The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.

Weight
78.3 g
Length
122.9 mm
Body diameter
25.4 mm
Head diameter
26.1 mm
Material
aluminium alloy with HAIII hard-anodized finish
Colors
black

System

The emitter of E1 Pro manufactured by Luminus, a US-based LED manufacturer. The E1 Pro has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.

Emitter
Luminus SST40 LED
Color temperature
6500 K
Reflector
SMO
Lens
toughtened AR coated glass
Switch
mechanical rear

Performance

The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.

Flux
1700 lm
Intensity
20192 cd
Throw
284 m
CD/LM factor
11.88

Software

The E1 Pro has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The E1 Pro is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.

Modes
3 modes
Mode memory
yes
Ramping mode
no
Strobe
yes
SOS/Beacon
no

Features

The E1 Pro cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.

Battery
1 x 18650 Li-Ion battery
Battery indicator
no
Charger port
no
LVP
yes
Thermal regulation
yes
Protection
IPx8
AUX LEDs
no
Magnetic
no

Accessories

The package includes a holster to safely store your flashlight. The clip is useful to keep the light secured in your pocket. The lanyard prevents accidental loss of the flashlight.

Package contents
2 x spare o-rings
clip
lanyard
nylon holster

The performance of the Speras E1 Pro flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Speras E1 Pro, then don’t hesite and signal the problem to us.

Speras E1 Pro (E1PRO) pictures

If there’s information about the Speras E1 Pro that you would like to see on this site, then write to our webmaster@flashlightchart.com address.

Back to Top
This website uses cookies which are small data files that it creates and stores on your computer. If you use this website, you agree with our cookies policy. More information