
Speras E1 (2019) review
The Speras E1 (E1) released in 2019. It uses Cree XP-G3 LED, SMO reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 500 lm output, 7200 cd intensity, and a beam distance of 170 m.
This light does not have memory function.
Table of contents:
Speras E1 (E1) specifications
- Brand
- Speras
- Name
- E1
- Type
- E1
- Rating
- Launch
- 2019
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 76.4 g
- Length
- 122.9 mm
- Body diameter
- 25.4 mm
- Head diameter
- 26.1 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
System
The emitter of E1 manufactured by Cree, a US-based LED manufacturing company. The E1 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Emitter
- Cree XP-G3 LED
- Color temperature
- 6500 K
- Reflector
- SMO
- Lens
- toughtened AR coated glass
- Switch
- mechanical rear
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 500 lm
- Intensity
- 7200 cd
- Throw
- 170 m
- CD/LM factor
- 14.4
Software
- Modes
- 1 mode
- Mode memory
- no
- Ramping mode
- no
- Strobe
- no
- SOS/Beacon
- no
Features
The E1 cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. This light does not have temperature control feature.
- Battery
- 1 x 18650 Li-Ion battery
- Battery indicator
- no
- Charger port
- no
- LVP
- yes
- Thermal regulation
- no
- Protection
- IPx8
- AUX LEDs
- no
- Magnetic
- no
Accessories
The clip is useful to keep the light secured in your pocket. The lanyard prevents accidental loss of the flashlight.
- Package contents
- 2 x spare o-rings
clip
lanyard
The performance of the Speras E1 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Speras E1, then don’t hesite and signal the problem to us.
Speras E1 (E1) pictures

If there’s information about the Speras E1 that you would like to see on this site, then write to us.