
Speras E1T (2019) review
The Speras E1T (E1T) released in 2019. It uses Luminus SST40 LED, SMO reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 1700 lm output, 20192 cd intensity, and a beam distance of 284 m.
This light does not have memory function. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
Speras E1T (E1T) specifications
- Brand
- Speras
- Name
- E1T
- Type
- E1T
- Rating
- Launch
- 2019
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 78.3 g
- Length
- 122.9 mm
- Body diameter
- 25.4 mm
- Head diameter
- 26.1 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
System
The emitter of E1T manufactured by Luminus, a US-based LED manufacturer. The E1T has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Emitter
- Luminus SST40 LED
- Color temperature
- 6500 K
- Reflector
- SMO
- Lens
- toughtened AR coated glass
- Switch
- mechanical rear
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 1700 lm
- Intensity
- 20192 cd
- Throw
- 284 m
- CD/LM factor
- 11.88
Software
The E1T is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.
- Modes
- 1 mode
- Mode memory
- no
- Ramping mode
- no
- Strobe
- yes
- SOS/Beacon
- no
Features
The E1T cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- Battery
- 1 x 18650 Li-Ion battery
- Battery indicator
- no
- Charger port
- no
- LVP
- yes
- Thermal regulation
- yes
- Protection
- IPx8
- AUX LEDs
- no
- Magnetic
- no
Accessories
The package includes a holster to safely store your flashlight. The lanyard prevents accidental loss of the flashlight.
- Package contents
- 2 x spare o-rings
lanyard
nylon holster
The performance of the Speras E1T flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Speras E1T, then don’t hesite and signal the problem to us.
Speras E1T (E1T) pictures

If there’s information about the Speras E1T that you would like to see on this site, then write to us.