Olight Odin (2020) review
The Olight Odin (ODIN) released in 2020. It uses unspecified LED, TIR reflector and 1 x 21700 Li-Ion battery. The powerful emitter in this flashlight provides up to 2000 lm output, 22500 cd intensity, and a beam distance of 300 m.
It uses a TIR lens to form the beam pattern. This light has 4 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. The Odin flashlight is rechargeable easily via USB port.
Table of contents:
Olight Odin (ODIN) specifications
- Brand
- Olight
- Name
- Odin
- Type
- ODIN
- Rating
- Launch
- 2020
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 216 g
- Length
- 136.5 mm
- Body diameter
- 26.6 mm
- Head diameter
- 29 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
desert tan
System
A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.
- Emitter
- unspecified LED
- Color temperature
- 5000 K
- Reflector
- TIR
- Lens
- TIR
- Switch
- electronic rear
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 2000 lm
- Intensity
- 22500 cd
- Throw
- 300 m
- CD/LM factor
- 11.25
Software
The Odin has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again.
- Modes
- 4 modes
- Mode memory
- yes
- Ramping mode
- no
- Strobe
- no
- SOS/Beacon
- no
Features
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- Battery
- 1 x 21700 Li-Ion battery
- Battery indicator
- yes
- Charger port
- magnetic USB
- LVP
- yes
- Thermal regulation
- yes
- Protection
- IPx8
- AUX LEDs
- no
- Magnetic
- no
- Specials
- vibrating power indicator
Accessories
It comes with a battery. The battery must be fully charged before you first use your Odin.
- Package contents
- 2 x adjustable screw
21700 battery
MCC3 magnetic USB charger cable
hexagon wrench
magnetic remote switch
self-locking band
The performance of the Olight Odin flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Olight Odin, then don’t hesite and signal the problem to us.
Olight Odin (ODIN) pictures
If there’s information about the Olight Odin that you would like to see on this site, then write to our webmaster@flashlightchart.com address.