
Olight Warrior X Pro (2020) review
The Olight Warrior X Pro (WARXPRO) released in 2020. It uses Cree XHP35 HI LED, SMO reflector and 1 x 21700 Li-Ion battery. The powerful emitter in this flashlight provides up to 2250 lm output, 90000 cd intensity, and a beam distance of 600 m.
This light has 2 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. The Warrior X Pro flashlight is rechargeable easily via USB port.
Table of contents:
Olight Warrior X Pro (WARXPRO) specifications
- Brand
- Olight
- Name
- Warrior X Pro
- Type
- WARXPRO
- Rating
- Launch
- 2020
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 239 g
- Length
- 149 mm
- Body diameter
- 26.2 mm
- Head diameter
- 39 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
desert camo
desert tan
gray
green
System
The emitter of Warrior X Pro manufactured by Cree, a US-based LED manufacturing company. The Warrior X Pro has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Emitter
- Cree XHP35 HI LED
- Color temperature
- 5000 K
- Reflector
- SMO
- Lens
- toughtened AR coated glass
- Switch
- electronic rear
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 2250 lm
- Intensity
- 90000 cd
- Throw
- 600 m
- CD/LM factor
- 40
Software
The Warrior X Pro has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again.
- Modes
- 2 modes
- Mode memory
- yes
- Ramping mode
- no
- Strobe
- no
- SOS/Beacon
- no
Features
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- Battery
- 1 x 21700 Li-Ion battery
- Battery indicator
- yes, with vibration
- Charger port
- magnetic USB
- LVP
- yes
- Thermal regulation
- yes
- Protection
- IPx8
- AUX LEDs
- no
- Magnetic
- no
Accessories
It comes with a battery. The battery must be fully charged before you first use your Warrior X Pro. The clip is useful to keep the light secured in your pocket. The lanyard prevents accidental loss of the flashlight.
- Package contents
- 21700 battery
MCC3 magnetic USB charger cable
clip
lanyard
tactical ring
The performance of the Olight Warrior X Pro flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Olight Warrior X Pro, then don’t hesite and signal the problem to us.
Olight Warrior X Pro (WARXPRO) pictures

If there’s information about the Olight Warrior X Pro that you would like to see on this site, then write to us.