FlashlightChart.com
FlashlightChart.com / Flashlights / Olight / Olight Arkfeld (2022)
Olight

Olight Arkfeld (2022) review

2022
1 x unspecified LED
1000 lm output
2560 cd intensity
integrated 1050 mAh Li-Ion battery

The Olight Arkfeld (ARKFELD) released in 2022. It uses 1 x unspecified LED, TIR reflector and integrated 1050 mAh Li-Ion battery. The powerful emitter in this flashlight provides up to 1000 lm output, 2560 cd intensity, and a beam distance of 101 m.

It uses a TIR lens to form the beam pattern. This light has 5 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. The Arkfeld flashlight is rechargeable easily via USB port.

Table of contents:

Olight Arkfeld (ARKFELD) specifications

Brand
Olight
Name
Arkfeld
Type
ARKFELD
Rating
Rated 3/5 based on 30 user votes.
Launch
2022
Form
flashlight

Body

The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.

Weight
87 g
Length
110 mm
Body diameter
15 mm
Head diameter
25 mm
Material
aluminium alloy with HAIII hard-anodized finish
Colors
black

System

A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.

Emitter
1 x unspecified LED
Color temperature
4500 K, 6000 K
Reflector
TIR
Lens
TIR
Switch
electronic side

Performance

The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.

Flux
1000 lm
Intensity
2560 cd
Throw
101 m
CD/LM factor
2.56
CRI
70

Software

The Arkfeld has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again.

Modes
5 modes
Mode memory
yes
Ramping mode
no
Strobe
no
SOS/Beacon
no

Features

The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.

Battery
integrated 1050 mAh Li-Ion battery
Battery indicator
yes
Charger port
magnetic USB
LVP
yes
Thermal regulation
yes
Protection
IPx7
Impact resistance
1 m
AUX LEDs
no
Magnetic
no
Specials
laser pointer

Accessories

Package contents
MCC3 magnetic USB charger cable

The performance of the Olight Arkfeld flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Olight Arkfeld, then don’t hesite and signal the problem to us.

Olight Arkfeld (ARKFELD) pictures

Olight Arkfeld / ARKFELD photo Olight Arkfeld / ARKFELD photo Olight Arkfeld / ARKFELD photo Olight Arkfeld / ARKFELD photo Olight Arkfeld / ARKFELD photo Olight Arkfeld / ARKFELD photo
Olight Arkfeld / ARKFELD

If there’s information about the Olight Arkfeld that you would like to see on this site, then write to us.

Back to Top