Olight Array (2019) review
The Olight Array (ARRAY) released in 2019. It uses 2 x Cree XP-G2 LEDs, TIR reflector and integrated 2000mAh Li-Ion battery. The powerful emitter in this headlamp provides up to 400 lm output, 1600 cd intensity, and a beam distance of 80 m.
It uses a TIR lens to form the beam pattern. This light has 4 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. The Array flashlight is rechargeable easily via USB port.
Table of contents:
Olight Array (ARRAY) specifications
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 124 g
- 64.5 mm
- Body diameter
- 24 mm
- Head diameter
- 42.4 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of Array manufactured by Cree, a US-based LED manufacturing company. A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.
- 2 x Cree XP-G2 LEDs
- Color temperature
- 6000 K
- electronic side
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 400 lm
- 1600 cd
- 80 m
- CD/LM factor
The Array has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- 4 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. This light does not have temperature control feature.
- integrated 2000mAh Li-Ion battery
- Battery indicator
- Charger port
- magnetic USB
- Thermal regulation
- AUX LEDs
- Package contents
- 2 x cable fixers
MCC1AL magnetic USB charger cable
The performance of the Olight Array flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Olight Array, then don’t hesite and signal the problem to us.
Olight Array (ARRAY) pictures
If there’s information about the Olight Array that you would like to see on this site, then write to our firstname.lastname@example.org address.