
Fitorch P25 (2018) review
The Fitorch P25 (P25) released in 2018. It uses 4 x Cree XP-G3 LEDs, TIR reflector and 1 x 26350 Li-Ion battery. The powerful emitter in this flashlight provides up to 3000 lm output, 13120 cd intensity, and a beam distance of 229 m.
It uses a TIR lens to form the beam pattern. This light has 4 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
Fitorch P25 (P25) specifications
- Brand
- Fitorch
- Name
- P25
- Type
- P25
- Rating
- Launch
- 2018
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 90 g
- Length
- 85.5 mm
- Body diameter
- 31.8 mm
- Head diameter
- 33.8 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
blue
red
System
The emitter of P25 manufactured by Cree, a US-based LED manufacturing company. A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.
- Emitter
- 4 x Cree XP-G3 LEDs
- Color temperature
- 6500 K
- Reflector
- TIR
- Lens
- TIR
- Switch
- electronic side
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 3000 lm
- Intensity
- 13120 cd
- Throw
- 229 m
- CD/LM factor
- 4.37
Software
The P25 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The P25 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.
- Modes
- 4 modes
- Mode memory
- yes
- Ramping mode
- no
- Strobe
- yes
- SOS/Beacon
- no
Features
The battery indicator lets you know when the battery is low, charging, or fully charged. The P25 cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- Battery
- 1 x 26350 Li-Ion battery
- Battery indicator
- yes
- Charger port
- no
- LVP
- yes
- Thermal regulation
- yes
- Protection
- IPx8
- AUX LEDs
- no
- Magnetic
- no
Accessories
It comes with a battery. The battery must be fully charged before you first use your P25. The package includes a holster to safely store your flashlight. The lanyard prevents accidental loss of the flashlight.
- Package contents
- 26350 battery with microUSB
lanyard
microUSB cable
nylon holster
spare o-ring
The performance of the Fitorch P25 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Fitorch P25, then don’t hesite and signal the problem to us.
Fitorch P25 (P25) pictures

If there’s information about the Fitorch P25 that you would like to see on this site, then write to us.