Fitorch P20RGT (2019) review
The Fitorch P20RGT (P20RGT) released in 2019. It uses Cree XP-L LED, SMO reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 1180 lm output, 18600 cd intensity, and a beam distance of 273 m.
This light has 4 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available. The P20RGT flashlight is rechargeable easily via USB port.
Table of contents:
Fitorch P20RGT (P20RGT) specifications
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
|Body diameter||25.4 mm|
|Head diameter||25.4 mm|
|Material||aluminium alloy with HAIII hard-anodized finish|
The emitter of P20RGT manufactured by Cree, a US-based LED manufacturing company. The P20RGT has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
|Emitter||Cree XP-L LED|
|Color temperature||6500 K|
|Lens||toughtened AR coated glass|
|Switch||electronic side, mechanical rear|
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
The P20RGT has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The P20RGT is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating. The P20RGT flashlight can be used as a powerbank to recharge a device, such as a mobile phone.
|Battery||1 x 18650 Li-Ion battery|
It comes with a battery. The battery must be fully charged before you first use your P20RGT. The package includes a holster to safely store your flashlight. The lanyard prevents accidental loss of the flashlight.
|Package contents||18650 battery with microUSB|
spare rubber cover
The performance of the Fitorch P20RGT flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Fitorch P20RGT, then don’t hesite and signal the problem to us.
Fitorch P20RGT (P20RGT) pictures
Fitorch P20RGT (P20RGT) comparisons
According to our statistics, the Fitorch P20RGT flashlight was most often compared on our site with the following flashlights.
Armytek Dobermann Pro XPL
YLP Unicorn 1.0
Sofirn SP33 v3
Convoy L6 XHP70.2 CW
If there’s information about the Fitorch P20RGT that you would like to see on this site, then write to us.