Fitorch MR35 (2017) review
The Fitorch MR35 (MR35) released in 2017. It uses Cree XP-L LED, SMO reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 1200 lm output, 13300 cd intensity, and a beam distance of 231 m.
This light has 4 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. The MR35 flashlight is rechargeable easily via USB port.
Table of contents:
Fitorch MR35 (MR35) specifications
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 170.2 g
- 147.5 mm
- Head diameter
- 40 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of MR35 manufactured by Cree, a US-based LED manufacturing company. The MR35 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Cree XP-L LED
- Color temperature
- 6500 K
- toughtened AR coated glass
- electronic side, mechanical rear
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 1200 lm
- 13300 cd
- 231 m
- CD/LM factor
The MR35 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again.
- 4 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating. It has auxiliary LEDs which make it really nice looking.
- 1 x 18650 Li-Ion battery
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
- RGB light
The package includes a holster to safely store your flashlight. The lanyard prevents accidental loss of the flashlight.
- Package contents
The performance of the Fitorch MR35 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Fitorch MR35, then don’t hesite and signal the problem to us.
Fitorch MR35 (MR35) pictures
If there’s information about the Fitorch MR35 that you would like to see on this site, then write to us.