Convoy L2 XPL (2016) review
The Convoy L2 XPL (L2XPL) released in 2016. It uses Cree XP-L HI LED, SMO reflector and 2 x 26650 Li-Ion batteries. The powerful emitter in this flashlight provides up to 1100 lm output, 250000 cd intensity, and a beam distance of 1000 m.
This light has 4 modes of lighting. The memory function is a nice feature, the light will remember the last used mode.
Table of contents:
Convoy L2 XPL (L2XPL) specifications
- L2 XPL
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 279 g
- 244 mm
- Body diameter
- 35 mm
- Head diameter
- 64.5 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of L2 XPL manufactured by Cree, a US-based LED manufacturing company. The L2 XPL has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Cree XP-L HI LED
- Color temperature
- 3000 K, 4000 K, 5000 K, 6500 K
- AR coated glass
- mechanical rear, forward clicky
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 1100 lm
- 250000 cd
- 1000 m
- CD/LM factor
The L2 XPL has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again.
- 4 modes
- Mode memory
- Ramping mode
The L2 XPL cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. This light does not have temperature control feature.
- 2 x 26650 Li-Ion batteries
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
- Package contents
- tactical ring
The performance of the Convoy L2 XPL flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Convoy L2 XPL, then don’t hesite and signal the problem to us.
Convoy L2 XPL (L2XPL) pictures
If there’s information about the Convoy L2 XPL that you would like to see on this site, then write to our firstname.lastname@example.org address.