Convoy S11 XHP50.2 (2019) review
The Convoy S11 XHP50.2 (S11XHP502) released in 2019. It uses Cree XHP50.2 LED, OP reflector and 1 x 26650 Li-Ion battery. The powerful emitter in this flashlight provides up to 2400 lm output, 10000 cd intensity, and a beam distance of 200 m.
This light has 4 modes of lighting. The memory function is a nice feature, the light will remember the last used mode.
Table of contents:
Convoy S11 XHP50.2 (S11XHP502) specifications
- S11 XHP50.2
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 171 g
- 139 mm
- Body diameter
- 33 mm
- Head diameter
- 33 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of S11 XHP50.2 manufactured by Cree, a US-based LED manufacturing company. The S11 XHP50.2 has an orange peel (OP) textured reflector. Orange peel reflectors have smoother beams. It has an AR coated lens.
- Cree XHP50.2 LED
- Color temperature
- 3000 K, 4000 K, 5000 K, 6500 K
- AR coated glass
- mechanical rear, forward clicky
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 2400 lm
- 10000 cd
- 200 m
- CD/LM factor
The S11 XHP50.2 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again.
- 4 modes
- Mode memory
- Ramping mode
The S11 XHP50.2 cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- 1 x 26650 Li-Ion battery
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
The lanyard prevents accidental loss of the flashlight.
- Package contents
The performance of the Convoy S11 XHP50.2 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Convoy S11 XHP50.2, then don’t hesite and signal the problem to us.
Convoy S11 XHP50.2 (S11XHP502) pictures
If there’s information about the Convoy S11 XHP50.2 that you would like to see on this site, then write to our email@example.com address.