Convoy M21C-U XHP70.2 (2020) review
The Convoy M21C-U XHP70.2 (M21CUXHP702) released in 2020. It uses Cree XHP70.2 LED, SMO reflector and 1 x 21700 Li-Ion battery. The powerful emitter in this flashlight provides up to 4300 lm output, 40000 cd intensity, and a beam distance of 400 m.
The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
Convoy M21C-U XHP70.2 (M21CUXHP702) specifications
- M21C-U XHP70.2
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 274 g
- 159 mm
- Body diameter
- 28 mm
- Head diameter
- 55 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of M21C-U XHP70.2 manufactured by Cree, a US-based LED manufacturing company. The M21C-U XHP70.2 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Cree XHP70.2 LED
- Color temperature
- 3000 K, 4000 K, 5000 K, 6500 K
- AR coated glass
- electronic side
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 4300 lm
- 40000 cd
- 400 m
- CD/LM factor
The M21C-U XHP70.2 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The ramping mode of the M21C-U XHP70.2 is intuitive, and lets you seamlessly ramp the output up and down over almost the entire output range. The M21C-U XHP70.2 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.
- Mode memory
- Ramping mode
The M21C-U XHP70.2 cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- 1 x 21700 Li-Ion battery
- Battery indicator
- Charger port
- Thermal regulation
- Impact resistance
- 1 m
- AUX LEDs
- Package contents
- 2 x spare o-ring
The performance of the Convoy M21C-U XHP70.2 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Convoy M21C-U XHP70.2, then don’t hesite and signal the problem to us.
Convoy M21C-U XHP70.2 (M21CUXHP702) pictures
If there’s information about the Convoy M21C-U XHP70.2 that you would like to see on this site, then write to our email@example.com address.