Convoy S2+ XML2 (2015) review
The Convoy S2+ XML2 (S2PXML2) released in 2015. It uses Cree XM-L2 LED, OP reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 1000 lm output, 2500 cd intensity, and a beam distance of 100 m.
This light has 4 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
Convoy S2+ XML2 (S2PXML2) specifications
- S2+ XML2
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 76 g
- 118 mm
- Body diameter
- 24.1 mm
- Head diameter
- 24.1 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of S2+ XML2 manufactured by Cree, a US-based LED manufacturing company. The S2+ XML2 has an orange peel (OP) textured reflector. Orange peel reflectors have smoother beams.
- Cree XM-L2 LED
- Color temperature
- 3000 K, 4000 K, 4300 K, 5000 K, 6500 K
- mechanical rear, reverse clicky
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 1000 lm
- 2500 cd
- 100 m
- CD/LM factor
The S2+ XML2 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The S2+ XML2 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- 4 modes
- Mode memory
- Ramping mode
The S2+ XML2 cannot charge batteries directly. You may need an external charger to keep your battery going. A protected battery is recommended as the light itself does not have low voltage protection (LVP). This light does not have temperature control feature.
- 1 x 18650 Li-Ion battery
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
The lanyard prevents accidental loss of the flashlight.
- Package contents
The performance of the Convoy S2+ XML2 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Convoy S2+ XML2, then don’t hesite and signal the problem to us.
Convoy S2+ XML2 (S2PXML2) pictures
If there’s information about the Convoy S2+ XML2 that you would like to see on this site, then write to our firstname.lastname@example.org address.