Brinyte WT01 Apollo (2019) review
The Brinyte WT01 Apollo (WT01) released in 2019. It uses Luminus SST40 LED, SMO reflector and 1 x 26650 Li-Ion battery. The powerful emitter in this flashlight provides up to 1100 lm output, 25475 cd intensity, and a beam distance of 319 m.
This light has 4 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
Brinyte WT01 Apollo (WT01) specifications
- WT01 Apollo
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 235 g
- 156 mm
- Body diameter
- 33 mm
- Head diameter
- 45 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of WT01 Apollo manufactured by Luminus, a US-based LED manufacturer. The WT01 Apollo has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Luminus SST40 LED
- Color temperature
- 6500 K
- AR coated glass
- electronic side
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 1100 lm
- 25475 cd
- 319 m
- CD/LM factor
The WT01 Apollo has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The WT01 Apollo is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- 4 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- 1 x 26650 Li-Ion battery
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
It comes with a battery. The battery must be fully charged before you first use your WT01 Apollo. The package includes a holster to safely store your flashlight.
- Package contents
- 18650 adapter
wireless charger dock
The performance of the Brinyte WT01 Apollo flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Brinyte WT01 Apollo, then don’t hesite and signal the problem to us.
Brinyte WT01 Apollo (WT01) pictures
If there’s information about the Brinyte WT01 Apollo that you would like to see on this site, then write to our firstname.lastname@example.org address.