Brinyte T18 Artemis (2020) review
The Brinyte T18 Artemis (T18) released in 2020. It uses Cree XP-L HI LED, no reflector and 1 x 21700 Li-Ion battery. The powerful emitter in this flashlight provides up to 650 lm output, 99225 cd intensity, and a beam distance of 630 m.
The memory function is a nice feature, the light will remember the last used mode.
Table of contents:
Brinyte T18 Artemis (T18) specifications
- Brand
- Brinyte
- Name
- T18 Artemis
- Type
- T18
- Rating
- Launch
- 2020
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 194 g
- Length
- 167 mm
- Body diameter
- 25.4 mm
- Head diameter
- 54 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
System
The emitter of T18 Artemis manufactured by Cree, a US-based LED manufacturing company.
- Emitter
- Cree XP-L HI LED
- Color temperature
- 6500 K
- Reflector
- no
- Lens
- convex resin
- Switch
- mechanical rear
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 650 lm
- Intensity
- 99225 cd
- Throw
- 630 m
- CD/LM factor
- 152.65
Software
The T18 Artemis has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The ramping mode of the T18 Artemis is intuitive, and lets you seamlessly ramp the output up and down over almost the entire output range.
- Mode memory
- yes
- Ramping mode
- yes
- Strobe
- no
- SOS/Beacon
- no
Features
The T18 Artemis cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- Battery
- 1 x 21700 Li-Ion battery
- Battery indicator
- no
- Charger port
- no
- LVP
- yes
- Thermal regulation
- yes
- Protection
- IP66
- Impact resistance
- 1 m
- AUX LEDs
- no
- Magnetic
- no
- Specials
- IR light
green light
interchangeable LED modules
red light
white light
zoomable
Accessories
It comes with a battery. The battery must be fully charged before you first use your T18 Artemis.
- Package contents
- 2 x spare o-rings
21700 battery with USB Type-C
IR LED module
USB Type-C cable
green LED module
red LED module
white LED module
wireless remote switch
The performance of the Brinyte T18 Artemis flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Brinyte T18 Artemis, then don’t hesite and signal the problem to us.
Brinyte T18 Artemis (T18) pictures
If there’s information about the Brinyte T18 Artemis that you would like to see on this site, then write to our webmaster@flashlightchart.com address.