FlashlightChart.com / Flashlights / Brinyte / Brinyte PT18 Pro Oathkeeper (2020)

Brinyte PT18 Pro Oathkeeper (2020) review

2020
Cree XHP35 HD LED
2000 lm output
32000 cd intensity
1 x 18650 Li-Ion battery

The Brinyte PT18 Pro Oathkeeper (PT18PRO) released in 2020. It uses Cree XHP35 HD LED, SMO reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 2000 lm output, 32000 cd intensity, and a beam distance of 358 m.

This light has 4 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available. The PT18 Pro Oathkeeper flashlight is rechargeable easily via USB port.

Table of contents:

Brinyte PT18 Pro Oathkeeper (PT18PRO) specifications

Brand
Brinyte
Name
PT18 Pro Oathkeeper
Type
PT18PRO
Rating
Rated 4/5 based on 155 user votes.
Thanks for rating!
Invalid rating.
Launch
2020
Form
flashlight

Body

The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.

Weight
170 g
Length
164 mm
Body diameter
25.4 mm
Head diameter
41 mm
Material
aluminium alloy with HAIII hard-anodized finish
Colors
desert tan

System

The emitter of PT18 Pro Oathkeeper manufactured by Cree, a US-based LED manufacturing company. The PT18 Pro Oathkeeper has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.

Emitter
Cree XHP35 HD LED
Color temperature
5000 K
Reflector
SMO
Lens
toughtened AR coated glass
Switch
electronic side, dual electronic rear

Performance

The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.

Flux
2000 lm
Intensity
32000 cd
Throw
358 m
CD/LM factor
16

Software

The PT18 Pro Oathkeeper has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The PT18 Pro Oathkeeper is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.

Modes
4 modes
Mode memory
yes
Ramping mode
no
Strobe
yes
SOS/Beacon
yes

Features

The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.

Battery
1 x 18650 Li-Ion battery
Battery indicator
yes
Charger port
magnetic USB
LVP
yes
Thermal regulation
yes
Protection
IP68
AUX LEDs
no
Magnetic
no

Accessories

It comes with a battery. The battery must be fully charged before you first use your PT18 Pro Oathkeeper. The package includes a holster to safely store your flashlight. The lanyard prevents accidental loss of the flashlight.

Package contents
18650 battery
lanyard
magnetic USB charger cable
nylon holster
tactical ring

The performance of the Brinyte PT18 Pro Oathkeeper flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Brinyte PT18 Pro Oathkeeper, then don’t hesite and signal the problem to us.

Brinyte PT18 Pro Oathkeeper (PT18PRO) pictures

If there’s information about the Brinyte PT18 Pro Oathkeeper that you would like to see on this site, then write to our webmaster@flashlightchart.com address.

Back to Top
This website uses cookies which are small data files that it creates and stores on your computer. If you use this website, you agree with our cookies policy. More information