Brinyte SR8 Rescue Angel (2019) review
The Brinyte SR8 Rescue Angel (SR8RA) released in 2019. It uses Cree XHP35 HI LED, SMO reflector and 4 x 18650 Li-Ion batteries. The powerful emitter in this flashlight provides up to 2100 lm output, 270000 cd intensity, and a beam distance of 1039 m.
This light has 4 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available. The SR8 Rescue Angel flashlight is rechargeable easily via USB port.
Table of contents:
Brinyte SR8 Rescue Angel (SR8RA) specifications
- Brand
- Brinyte
- Name
- SR8 Rescue Angel
- Type
- SR8RA
- Rating
- Launch
- 2019
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 740 g
- Length
- 217 mm
- Body diameter
- 58 mm
- Head diameter
- 78 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
System
The emitter of SR8 Rescue Angel manufactured by Cree, a US-based LED manufacturing company. The SR8 Rescue Angel has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Emitter
- Cree XHP35 HI LED
- Color temperature
- 6500 K
- Reflector
- SMO
- Lens
- AR coated glass
- Switch
- electronic side
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 2100 lm
- Intensity
- 270000 cd
- Throw
- 1039 m
- CD/LM factor
- 128.57
Software
The SR8 Rescue Angel has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The SR8 Rescue Angel is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- Modes
- 4 modes
- Mode memory
- yes
- Ramping mode
- no
- Strobe
- yes
- SOS/Beacon
- yes
Features
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- Battery
- 4 x 18650 Li-Ion batteries
- Battery indicator
- yes
- Charger port
- magnetic USB
- LVP
- yes
- Thermal regulation
- yes
- Protection
- IP68
- AUX LEDs
- no
- Magnetic
- no
Accessories
It comes with a battery. The battery must be fully charged before you first use your SR8 Rescue Angel.
- Package contents
- 4 x 18650 batteries
H4 battery charger
magnetic USB charger cable
shoulder strap
The performance of the Brinyte SR8 Rescue Angel flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Brinyte SR8 Rescue Angel, then don’t hesite and signal the problem to us.
Brinyte SR8 Rescue Angel (SR8RA) pictures
If there’s information about the Brinyte SR8 Rescue Angel that you would like to see on this site, then write to us.