Astrolux MF02S V2 SBT90.2 (2020) review
The Astrolux MF02S V2 SBT90.2 (MF02SV2SBT902) released in 2020. It uses Luminus SBT90.2 LED, SMO reflector and 4 x 18650 Li-Ion batteries. The powerful emitter in this flashlight provides up to 6500 lm output, 750000 cd intensity, and a beam distance of 1732 m.
This light has 6 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
Astrolux MF02S V2 SBT90.2 (MF02SV2SBT902) specifications
- MF02S V2 SBT90.2
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 818 g
- 189 mm
- Body diameter
- 54 mm
- Head diameter
- 84 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of MF02S V2 SBT90.2 manufactured by Luminus, a US-based LED manufacturer. The MF02S V2 SBT90.2 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Luminus SBT90.2 LED
- Color temperature
- 6500 K
- toughtened AR coated glass
- electronic side
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 6500 lm
- 750000 cd
- 1732 m
- CD/LM factor
The MF02S V2 SBT90.2 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The MF02S V2 SBT90.2 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- 6 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. The MF02S V2 SBT90.2 cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- 4 x 18650 Li-Ion batteries
- Battery indicator
- Charger port
- Thermal regulation
- Impact resistance
- 1 m
- AUX LEDs
The package includes a holster to safely store your flashlight. The lanyard prevents accidental loss of the flashlight.
- Package contents
- 2 x spare o-rings
tripod mount screw
The performance of the Astrolux MF02S V2 SBT90.2 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Astrolux MF02S V2 SBT90.2, then don’t hesite and signal the problem to us.
Astrolux MF02S V2 SBT90.2 (MF02SV2SBT902) pictures
If there’s information about the Astrolux MF02S V2 SBT90.2 that you would like to see on this site, then write to our firstname.lastname@example.org address.