Astrolux MF01 XP-G3 (2017) review
The Astrolux MF01 XP-G3 (MF01XPG3) released in 2017. It uses 18 x Cree XP-G3 LEDs, TIR reflector and 4 x 18650 Li-Ion batteries. The powerful emitter in this flashlight provides up to 12000 lm output, 53960 cd intensity, and a beam distance of 465 m.
It uses a TIR lens to form the beam pattern. This light has 5 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
Astrolux MF01 XP-G3 (MF01XPG3) specifications
- MF01 XP-G3
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 550 g
- 125 mm
- Body diameter
- 52 mm
- Head diameter
- 72 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of MF01 XP-G3 manufactured by Cree, a US-based LED manufacturing company. A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.
- 18 x Cree XP-G3 LEDs
- Color temperature
- 6500 K
- electronic side
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 12000 lm
- 53960 cd
- 465 m
- CD/LM factor
The MF01 XP-G3 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The MF01 XP-G3 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- 5 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. The MF01 XP-G3 cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- 4 x 18650 Li-Ion batteries
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
The lanyard prevents accidental loss of the flashlight.
- Package contents
- 2 x spare o-rings
tripod mount screw
The performance of the Astrolux MF01 XP-G3 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Astrolux MF01 XP-G3, then don’t hesite and signal the problem to us.
Astrolux MF01 XP-G3 (MF01XPG3) pictures
If there’s information about the Astrolux MF01 XP-G3 that you would like to see on this site, then write to our email@example.com address.