Astrolux HL01 SST20 (2019) review
The Astrolux HL01 SST20 (HL01SST20) released in 2019. It uses Luminus SST20 LED, OP reflector and 1 x 18650 or 1 x 18350 Li-Ion battery. The powerful emitter in this headlamp provides up to 1200 lm output, 6900 cd intensity, and a beam distance of 166 m.
The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available. The HL01 SST20 flashlight is rechargeable easily via USB port.
Table of contents:
Astrolux HL01 SST20 (HL01SST20) specifications
- HL01 SST20
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 122 g
- 124 mm
- Head diameter
- 24.8 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of HL01 SST20 manufactured by Luminus, a US-based LED manufacturer. The HL01 SST20 has an orange peel (OP) textured reflector. Orange peel reflectors have smoother beams. It has an AR coated lens.
- Luminus SST20 LED
- Color temperature
- 4000 K
- AR coated glass
- electronic front
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 1200 lm
- 6900 cd
- 166 m
- CD/LM factor
The HL01 SST20 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The ramping mode of the HL01 SST20 is intuitive, and lets you seamlessly ramp the output up and down over almost the entire output range. The HL01 SST20 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating. It has auxiliary LEDs which make it really nice looking. The HL01 SST20 is magnetic so that the flashlight can be attached to some metallic surfaces.
- 1 x 18650 or 1 x 18350 Li-Ion battery
- Battery indicator
- Charger port
- USB Type-C
- Thermal regulation
- AUX LEDs
- blue AUX LEDs
The clip is useful to keep the light secured in your pocket.
- Package contents
- 18350 tube
2 x spare o-rings
The performance of the Astrolux HL01 SST20 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Astrolux HL01 SST20, then don’t hesite and signal the problem to us.
Astrolux HL01 SST20 (HL01SST20) pictures
If there’s information about the Astrolux HL01 SST20 that you would like to see on this site, then write to our firstname.lastname@example.org address.