FlashlightChart.com / Flashlights / Thrunite / Thrunite Ti4 v2 (2018)

Thrunite Ti4 v2 (2018) review

2018
Cree XP-G2 LED
252 lm output
1120 cd intensity
2 x AAA batteries

The Thrunite Ti4 v2 (TI4V2) released in 2018. It uses Cree XP-G2 LED, OP reflector and 2 x AAA batteries. The powerful emitter in this flashlight provides up to 252 lm output, 1120 cd intensity, and a beam distance of 67 m.

This light has 3 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.

Table of contents:

Thrunite Ti4 v2 (TI4V2) specifications

Brand
Thrunite
Name
Ti4 v2
Type
TI4V2
Rating
Rated 3/5 based on 133 user votes.
Thanks for rating!
Invalid rating.
Launch
2018
Form
flashlight

Body

The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.

Weight
22.3 g
Length
132.9 mm
Body diameter
14.2 mm
Head diameter
14.2 mm
Material
aluminium alloy with HAIII hard-anodized finish
Colors
black

System

The emitter of Ti4 v2 manufactured by Cree, a US-based LED manufacturing company. The Ti4 v2 has an orange peel (OP) textured reflector. Orange peel reflectors have smoother beams. It has an AR coated lens.

Emitter
Cree XP-G2 LED
Color temperature
5000 K, 6500 K
Reflector
OP
Lens
AR coated glass
Switch
mechanical rear

Performance

The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.

Flux
252 lm
Intensity
1120 cd
Throw
67 m
CD/LM factor
4.44

Software

The Ti4 v2 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The Ti4 v2 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.

Modes
3 modes
Mode memory
yes
Ramping mode
no
Strobe
yes
SOS/Beacon
no

Features

The Ti4 v2 cannot charge batteries directly. You may need an external charger to keep your battery going. A protected battery is recommended as the light itself does not have low voltage protection (LVP). This light does not have temperature control feature.

Battery
2 x AAA batteries
Battery indicator
no
Charger port
no
LVP
no
Thermal regulation
no
Protection
IPx8
AUX LEDs
no
Magnetic
no

Accessories

Package contents
2 x spare o-rings

The performance of the Thrunite Ti4 v2 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Thrunite Ti4 v2, then don’t hesite and signal the problem to us.

Thrunite Ti4 v2 (TI4V2) pictures

If there’s information about the Thrunite Ti4 v2 that you would like to see on this site, then write to our webmaster@flashlightchart.com address.

Back to Top
This website uses cookies which are small data files that it creates and stores on your computer. If you use this website, you agree with our cookies policy. More information