Thrunite TH30 (2018) review

Cree XHP70.2 LED
3350 lm output
6550 cd intensity
1 x 18650 Li-Ion battery

The Thrunite TH30 (TH30) released in 2018. It uses Cree XHP70.2 LED, SMO reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this headlamp provides up to 3350 lm output, 6550 cd intensity, and a beam distance of 162 m.

This light has 6 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. The TH30 flashlight is rechargeable easily via USB port.

Table of contents:

Thrunite TH30 (TH30) specifications

Rated 3/5 based on 1027 user votes.


The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.

Weight123 g
Length107 mm
Body diameter24 mm
Head diameter28.5 mm
Materialaluminium alloy with HAIII hard-anodized finish


The emitter of TH30 manufactured by Cree, a US-based LED manufacturing company. The TH30 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.

EmitterCree XHP70.2 LED
Color temperature5000 K, 6500 K
Lenstoughtened AR coated glass
Switchelectronic front


The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.

Flux3350 lm
Intensity6550 cd
Throw162 m
CD/LM factor1.96


The TH30 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.

Modes6 modes
Mode memoryyes
Ramping modeno


The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.

Battery1 x 18650 Li-Ion battery
Battery indicatoryes
Charger portmicroUSB
Thermal regulationyes


It comes with a battery. The battery must be fully charged before you first use your TH30. The clip is useful to keep the light secured in your pocket.

Package contents18650 battery
2 x spare o-rings
microUSB cable
rubber slot
spare USB plug

The performance of the Thrunite TH30 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Thrunite TH30, then don’t hesite and signal the problem to us.

Thrunite TH30 (TH30) pictures

Thrunite TH30 / TH30 photo Thrunite TH30 / TH30 photo
Thrunite TH30 / TH30

Thrunite TH30 (TH30) comparisons

According to our statistics, the Thrunite TH30 flashlight was most often compared on our site with the following flashlights.

Thrunite TH30
Thrunite TH30
vs Powertac E9R-G4
Powertac E9R-G4

If there’s information about the Thrunite TH30 that you would like to see on this site, then write to us.

FlashlightChart.com / Flashlights / Thrunite / Thrunite TH30 (2018)
Back to Top