Olight Baton 3 Pro CW (2022) review
The Olight Baton 3 Pro CW (BATON3PROCW) released in 2022. It uses Luminus SST40 LED, TIR reflector and 1 x special 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 1500 lm output, 7900 cd intensity, and a beam distance of 178 m.
It uses a TIR lens to form the beam pattern. This light has 5 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available. The Baton 3 Pro CW flashlight is rechargeable easily via USB port.
Table of contents:
Olight Baton 3 Pro CW (BATON3PROCW) specifications
- Baton 3 Pro CW
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 103 g
- 101 mm
- Body diameter
- 23 mm
- Head diameter
- 23 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of Baton 3 Pro CW manufactured by Luminus, a US-based LED manufacturer. A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.
- Luminus SST40 LED
- Color temperature
- 6500 K
- electronic side
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 1500 lm
- 7900 cd
- 178 m
- CD/LM factor
The Baton 3 Pro CW has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The Baton 3 Pro CW is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.
- 5 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. A protected battery is recommended as the light itself does not have low voltage protection (LVP). The built-in thermal control automatically adjusts brightness output to prevent overheating. The Baton 3 Pro CW is magnetic so that the flashlight can be attached to some metallic surfaces.
- 1 x special 18650 Li-Ion battery
- Battery indicator
- Charger port
- magnetic USB
- Thermal regulation
- AUX LEDs
It comes with a battery. The battery must be fully charged before you first use your Baton 3 Pro CW. The clip is useful to keep the light secured in your pocket. The lanyard prevents accidental loss of the flashlight.
- Package contents
- MCC3 magnetic USB charger cable
special 18650 battery
The performance of the Olight Baton 3 Pro CW flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Olight Baton 3 Pro CW, then don’t hesite and signal the problem to us.
Olight Baton 3 Pro CW (BATON3PROCW) pictures
If there’s information about the Olight Baton 3 Pro CW that you would like to see on this site, then write to us.