Nextorch TA30 v2 (2019) review

Osram P9 LED
1300 lm output
14400 cd intensity
1 x 18650 Li-Ion battery

The Nextorch TA30 v2 (TA30V2) released in 2019. It uses Osram P9 LED, SMO reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 1300 lm output, 14400 cd intensity, and a beam distance of 240 m.

This light has 3 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.

Table of contents:

Nextorch TA30 v2 (TA30V2) specifications

NameTA30 v2
Rated 3/5 based on 1027 user votes.


The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.

Weight99 g
Length137 mm
Body diameter23 mm
Head diameter30 mm
Materialaluminium alloy with HAIII hard-anodized finish


The emitter of TA30 v2 manufactured by Osram, a German lighting manufacturer. The TA30 v2 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.

EmitterOsram P9 LED
Color temperature6500 K
Lenstoughtened AR coated glass
Switchmechanical rear, rotary rear


The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.

Flux1300 lm
Intensity14400 cd
Throw240 m
CD/LM factor11.08


The TA30 v2 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The TA30 v2 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.

Modes3 modes
Mode memoryyes
Ramping modeno


The TA30 v2 cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.

Battery1 x 18650 Li-Ion battery
Battery indicatorno
Charger portno
Thermal regulationyes


It comes with a battery. The battery must be fully charged before you first use your TA30 v2. The clip is useful to keep the light secured in your pocket.

Package contents18650 battery
2 x spare o-rings

The performance of the Nextorch TA30 v2 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Nextorch TA30 v2, then don’t hesite and signal the problem to us.

Nextorch TA30 v2 (TA30V2) pictures

Nextorch TA30 v2 / TA30V2 photo Nextorch TA30 v2 / TA30V2 photo Nextorch TA30 v2 / TA30V2 photo Nextorch TA30 v2 / TA30V2 photo Nextorch TA30 v2 / TA30V2 photo
Nextorch TA30 v2 / TA30V2

Nextorch TA30 v2 (TA30V2) comparisons

According to our statistics, the Nextorch TA30 v2 flashlight was most often compared on our site with the following flashlights.

Nextorch TA30 v2
Nextorch TA30 v2
vs Acebeam P17
Acebeam P17
Fenix PD25
Fenix PD25
vs Nextorch TA30 v2
Nextorch TA30 v2
Acebeam T27
Acebeam T27
vs Nextorch TA30 v2
Nextorch TA30 v2
Fenix PD40R v2
Fenix PD40R v2
vs Nextorch TA30 v2
Nextorch TA30 v2

If there’s information about the Nextorch TA30 v2 that you would like to see on this site, then write to us.

FlashlightChart.com / Flashlights / Nextorch / Nextorch TA30 v2 (2019)
Back to Top