Nextorch TA5 (2017) review
The Nextorch TA5 (TA5) released in 2017. It uses Cree XP-L HD LED, SMO reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 900 lm output, 14400 cd intensity, and a beam distance of 240 m.
This light has 3 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available. The TA5 flashlight is rechargeable easily via USB port.
Table of contents:
Nextorch TA5 (TA5) specifications
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 170 g
- 178 mm
- Body diameter
- 26.5 mm
- Head diameter
- 38.5 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of TA5 manufactured by Cree, a US-based LED manufacturing company. The TA5 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Cree XP-L HD LED
- Color temperature
- 6500 K
- toughtened AR coated glass
- electronic side, mechanical rear
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 900 lm
- 14400 cd
- 240 m
- CD/LM factor
The TA5 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The TA5 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- 3 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. This light does not have temperature control feature.
- 1 x 18650 Li-Ion battery
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
It comes with a battery. The battery must be fully charged before you first use your TA5. The lanyard prevents accidental loss of the flashlight.
- Package contents
- 18650 battery
2 x spare o-rings
The performance of the Nextorch TA5 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Nextorch TA5, then don’t hesite and signal the problem to us.
Nextorch TA5 (TA5) pictures
If there’s information about the Nextorch TA5 that you would like to see on this site, then write to us.