
Manker MK36 XHP (2019) review
The Manker MK36 XHP (MK36XHP) released in 2019. It uses 6 x Cree XHP50.2 LEDs, TIR reflector and 3 x 18650 Li-Ion batteries. The powerful emitter in this flashlight provides up to 12000 lm output, 22000 cd intensity, and a beam distance of 297 m.
It uses a TIR lens to form the beam pattern. This light has 5 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available. The MK36 XHP flashlight is rechargeable easily via USB port.
Table of contents:
Manker MK36 XHP (MK36XHP) specifications
- Brand
- Manker
- Name
- MK36 XHP
- Type
- MK36XHP
- Rating
- Launch
- 2019
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 266 g
- Length
- 110 mm
- Head diameter
- 53 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- gray
System
The emitter of MK36 XHP manufactured by Cree, a US-based LED manufacturing company. A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.
- Emitter
- 6 x Cree XHP50.2 LEDs
- Color temperature
- 6500 K
- Reflector
- TIR
- Lens
- TIR
- Switch
- electronic side
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 12000 lm
- Intensity
- 22000 cd
- Throw
- 297 m
- CD/LM factor
- 1.83
Software
The MK36 XHP has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The MK36 XHP is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- Modes
- 5 modes
- Mode memory
- yes
- Ramping mode
- no
- Strobe
- yes
- SOS/Beacon
- yes
Features
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating. The MK36 XHP flashlight can be used as a powerbank to recharge a device, such as a mobile phone.
- Battery
- 3 x 18650 Li-Ion batteries
- Battery indicator
- yes
- Charger port
- USB Type-C
- LVP
- yes
- Thermal regulation
- yes
- Protection
- IPx6
- AUX LEDs
- no
- Magnetic
- no
- Specials
- powerbank function
Accessories
The package includes a holster to safely store your flashlight. The lanyard prevents accidental loss of the flashlight.
- Package contents
- USB Type-C OTG cable
USB Type-C cable
lanyard
nylon holster
spare o-ring
The performance of the Manker MK36 XHP flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Manker MK36 XHP, then don’t hesite and signal the problem to us.
Manker MK36 XHP (MK36XHP) pictures

If there’s information about the Manker MK36 XHP that you would like to see on this site, then write to us.