Manker MK34 II SST40 NW (2021) review
The Manker MK34 II SST40 NW (MK34IISST40NW) released in 2021. It uses 12 x Luminus SST40 LEDs, OP reflector and 3 x 18650 Li-Ion batteries. The powerful emitter in this flashlight provides up to 17600 lm output, 27225 cd intensity, and a beam distance of 330 m.
This light has 7 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
Manker MK34 II SST40 NW (MK34IISST40NW) specifications
- MK34 II SST40 NW
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 316 g
- 109.5 mm
- Body diameter
- 46 mm
- Head diameter
- 63.4 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of MK34 II SST40 NW manufactured by Luminus, a US-based LED manufacturer. The MK34 II SST40 NW has an orange peel (OP) textured reflector. Orange peel reflectors have smoother beams. It has an AR coated lens.
- 12 x Luminus SST40 LEDs
- Color temperature
- 5000 K
- toughtened AR coated glass
- electronic side
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 17600 lm
- 27225 cd
- 330 m
- CD/LM factor
The MK34 II SST40 NW has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The MK34 II SST40 NW is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- 7 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. The MK34 II SST40 NW cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- 3 x 18650 Li-Ion batteries
- Battery indicator
- Charger port
- Thermal regulation
- Impact resistance
- 1 m
- AUX LEDs
The package includes a holster to safely store your flashlight. The lanyard prevents accidental loss of the flashlight.
- Package contents
tripod thread adapter
The performance of the Manker MK34 II SST40 NW flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Manker MK34 II SST40 NW, then don’t hesite and signal the problem to us.
Manker MK34 II SST40 NW (MK34IISST40NW) pictures
If there’s information about the Manker MK34 II SST40 NW that you would like to see on this site, then write to us.