Manker E04 (2018) review
The Manker E04 (E04) released in 2018. It uses Cree XP-L HD LED, no reflector and 1 x 16340 Li-Ion battery. The powerful emitter in this flashlight provides up to 550 lm output, 200 cd intensity, and a beam distance of 28 m.
This light has 4 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
Manker E04 (E04) specifications
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 34 g
- 55 mm
- Head diameter
- 22 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of E04 manufactured by Cree, a US-based LED manufacturing company. It has an AR coated lens.
- Cree XP-L HD LED
- Color temperature
- 5000 K, 6500 K
- toughtened AR coated glass
- electronic front
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 550 lm
- 200 cd
- 28 m
- CD/LM factor
The E04 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The E04 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- 4 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. The E04 cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. This light does not have temperature control feature. It has auxiliary LEDs which make it really nice looking. The E04 is magnetic so that the flashlight can be attached to some metallic surfaces.
- 1 x 16340 Li-Ion battery
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
It comes with a battery. The battery must be fully charged before you first use your E04. The lanyard prevents accidental loss of the flashlight.
- Package contents
- 16340 battery with microUSB
The performance of the Manker E04 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Manker E04, then don’t hesite and signal the problem to us.
Manker E04 (E04) pictures
If there’s information about the Manker E04 that you would like to see on this site, then write to us.