Manker E05 (2020) review
The Manker E05 (E05) released in 2020. It uses Osram KW CSLNM1.TG LED, OP reflector and 1 x AA battery. The powerful emitter in this flashlight provides up to 400 lm output, 4500 cd intensity, and a beam distance of 134 m.
This light has 3 modes of lighting. This light does not have memory function. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
Manker E05 (E05) specifications
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 37.4 g
- 93 mm
- Head diameter
- 20 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of E05 manufactured by Osram, a German lighting manufacturer. The E05 has an orange peel (OP) textured reflector. Orange peel reflectors have smoother beams. It has an AR coated lens.
- Osram KW CSLNM1.TG LED
- Color temperature
- 6500 K
- toughtened AR coated glass
- mechanical rear
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 400 lm
- 4500 cd
- 134 m
- CD/LM factor
The E05 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.
- 3 modes
- Mode memory
- Ramping mode
The E05 cannot charge batteries directly. You may need an external charger to keep your battery going. A protected battery is recommended as the light itself does not have low voltage protection (LVP). This light does not have temperature control feature.
- 1 x AA battery
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
The clip is useful to keep the light secured in your pocket. The lanyard prevents accidental loss of the flashlight.
- Package contents
The performance of the Manker E05 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Manker E05, then don’t hesite and signal the problem to us.
Manker E05 (E05) pictures
If there’s information about the Manker E05 that you would like to see on this site, then write to us.