Manker MC11 (2017) review
The Manker MC11 (MC11) released in 2017. It uses Cree XP-L HD LED, OP reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 1300 lm output, 6000 cd intensity, and a beam distance of 155 m.
This light has 5 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
Manker MC11 (MC11) specifications
- Brand
- Manker
- Name
- MC11
- Type
- MC11
- Rating
- Launch
- 2017
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 118 g
- Length
- 118 mm
- Head diameter
- 24 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
System
The emitter of MC11 manufactured by Cree, a US-based LED manufacturing company. The MC11 has an orange peel (OP) textured reflector. Orange peel reflectors have smoother beams. It has an AR coated lens.
- Emitter
- Cree XP-L HD LED
- Color temperature
- 5000 K, 6500 K
- Reflector
- OP
- Lens
- toughtened AR coated glass
- Switch
- electronic side, mechanical rear
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 1300 lm
- Intensity
- 6000 cd
- Throw
- 155 m
- CD/LM factor
- 4.62
Software
The MC11 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The MC11 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.
- Modes
- 5 modes
- Mode memory
- yes
- Ramping mode
- no
- Strobe
- yes
- SOS/Beacon
- no
Features
The battery indicator lets you know when the battery is low, charging, or fully charged. The MC11 cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. This light does not have temperature control feature.
- Battery
- 1 x 18650 Li-Ion battery
- Battery indicator
- yes
- Charger port
- no
- LVP
- yes
- Thermal regulation
- no
- Protection
- IPx8
- AUX LEDs
- no
- Magnetic
- no
Accessories
It comes with a battery. The battery must be fully charged before you first use your MC11. The clip is useful to keep the light secured in your pocket. The lanyard prevents accidental loss of the flashlight.
- Package contents
- 18650 battery with microUSB
clip
lanyard
spare o-ring
The performance of the Manker MC11 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Manker MC11, then don’t hesite and signal the problem to us.
Manker MC11 (MC11) pictures
If there’s information about the Manker MC11 that you would like to see on this site, then write to our webmaster@flashlightchart.com address.