Manker E14 III (2020) review
The Manker E14 III (E14III) released in 2020. It uses 4 x Samsung LH351D LEDs, TIR reflector and 1 x 18350 Li-Ion battery. The powerful emitter in this flashlight provides up to 4000 lm output, 6000 cd intensity, and a beam distance of 155 m.
It uses a TIR lens to form the beam pattern. This light has 5 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
Manker E14 III (E14III) specifications
- E14 III
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 82.8 g
- 71.2 mm
- Body diameter
- 25.8 mm
- Head diameter
- 28 mm
- copper head, aluminium alloy body with HAIII hard-anodized finish
A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.
- 4 x Samsung LH351D LEDs
- Color temperature
- 4000 K, 6500 K
- electronic rear
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 4000 lm
- 6000 cd
- 155 m
- CD/LM factor
The E14 III has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The E14 III is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- 5 modes
- Mode memory
- Ramping mode
The E14 III cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- 1 x 18350 Li-Ion battery
- Battery indicator
- Charger port
- Thermal regulation
- Impact resistance
- 1 m
- AUX LEDs
It comes with a battery. The battery must be fully charged before you first use your E14 III. The clip is useful to keep the light secured in your pocket. The lanyard prevents accidental loss of the flashlight.
- Package contents
- 18350 battery with USB Type-C
USB Type-C cable
The performance of the Manker E14 III flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Manker E14 III, then don’t hesite and signal the problem to us.
Manker E14 III (E14III) pictures
If there’s information about the Manker E14 III that you would like to see on this site, then write to our firstname.lastname@example.org address.