
Lumintop FW21 Pro (2020) review
The Lumintop FW21 Pro (FW21P) released in 2020. It uses 3 x Cree XHP50.2 CW LEDs, OP reflector and 1 x 21700 Li-Ion battery. The powerful emitter in this flashlight provides up to 10000 lm output, 26055 cd intensity, and a beam distance of 323 m.
The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
Lumintop FW21 Pro (FW21P) specifications
- Brand
- Lumintop
- Name
- FW21 Pro
- Type
- FW21P
- Rating
- Launch
- 2020
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 120 g
- Length
- 102 mm
- Body diameter
- 28 mm
- Head diameter
- 40 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- silver
System
The emitter of FW21 Pro manufactured by Cree, a US-based LED manufacturing company. The FW21 Pro has an orange peel (OP) textured reflector. Orange peel reflectors have smoother beams. It has an AR coated lens.
- Emitter
- 3 x Cree XHP50.2 CW LEDs
- Color temperature
- 5000 K
- Reflector
- OP
- Lens
- AR coated glass
- Switch
- electronic rear
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 10000 lm
- Intensity
- 26055 cd
- Throw
- 323 m
- CD/LM factor
- 2.61
Software
The FW21 Pro has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The ramping mode of the FW21 Pro is intuitive, and lets you seamlessly ramp the output up and down over almost the entire output range. The FW21 Pro is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- Firmware
- Anduril
- Mode memory
- yes
- Ramping mode
- yes
- Strobe
- yes
- SOS/Beacon
- yes
Features
The FW21 Pro cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- Battery
- 1 x 21700 Li-Ion battery
- Battery indicator
- no
- Charger port
- no
- LVP
- yes
- Thermal regulation
- yes
- Protection
- IPx8
- AUX LEDs
- no
- Magnetic
- no
The performance of the Lumintop FW21 Pro flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Lumintop FW21 Pro, then don’t hesite and signal the problem to us.
Lumintop FW21 Pro (FW21P) pictures

If there’s information about the Lumintop FW21 Pro that you would like to see on this site, then write to us.