Lumintop E05C (2020) review
The Lumintop E05C (E05C) released in 2020. It uses 1 x Cree XP-L HI LED, 4 x Nichia NCSLE17 LEDs, OP reflector and 1 x 14500 Li-Ion. The powerful emitter in this flashlight provides up to 550 lm output, 6400 cd intensity, and a beam distance of 160 m.
This light has 4 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available. The E05C flashlight is rechargeable easily via USB port.
Table of contents:
Lumintop E05C (E05C) specifications
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 68.7 g
- 92.3 mm
- Head diameter
- 20.4 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of E05C manufactured by Cree, a US-based LED manufacturing company. The emitter of E05C manufactured by Nichia, a Japanese LED manufacturer. The E05C has an orange peel (OP) textured reflector. Orange peel reflectors have smoother beams. It has an AR coated lens.
- 1 x Cree XP-L HI LED, 4 x Nichia NCSLE17 LEDs
- Color temperature
- 5000 K
- AR coated glass
- electronic side
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 550 lm
- 6400 cd
- 160 m
- CD/LM factor
The E05C has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The E05C is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- 4 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. This light does not have temperature control feature. The E05C is magnetic so that the flashlight can be attached to some metallic surfaces.
- 1 x 14500 Li-Ion
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
- secondary side emitter
The clip is useful to keep the light secured in your pocket.
- Package contents
The performance of the Lumintop E05C flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Lumintop E05C, then don’t hesite and signal the problem to us.
Lumintop E05C (E05C) pictures
If there’s information about the Lumintop E05C that you would like to see on this site, then write to our firstname.lastname@example.org address.