Lumintop GT Mini Pro (2020) review
The Lumintop GT Mini Pro (GTMINIPRO) released in 2020. It uses Cree XHP50.2 LED, OP reflector and 1 x 18650 or 1 x 18350 Li-Ion battery. The powerful emitter in this flashlight provides up to 3500 lm output, 57753 cd intensity, and a beam distance of 481 m.
The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
Lumintop GT Mini Pro (GTMINIPRO) specifications
- GT Mini Pro
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 150 g
- 132 mm
- Head diameter
- 50 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of GT Mini Pro manufactured by Cree, a US-based LED manufacturing company. The GT Mini Pro has an orange peel (OP) textured reflector. Orange peel reflectors have smoother beams. It has an AR coated lens.
- Cree XHP50.2 LED
- Color temperature
- 5000 K
- toughtened AR coated glass
- electronic side
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 3500 lm
- 57753 cd
- 481 m
- CD/LM factor
The GT Mini Pro has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The ramping mode of the GT Mini Pro is intuitive, and lets you seamlessly ramp the output up and down over almost the entire output range. The GT Mini Pro is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. The GT Mini Pro cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- 1 x 18650 or 1 x 18350 Li-Ion battery
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
The lanyard prevents accidental loss of the flashlight.
- Package contents
- 18350 tube
2 x spare o-rings
The performance of the Lumintop GT Mini Pro flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Lumintop GT Mini Pro, then don’t hesite and signal the problem to us.
Lumintop GT Mini Pro (GTMINIPRO) pictures
If there’s information about the Lumintop GT Mini Pro that you would like to see on this site, then write to us.