Jetbeam BC25 XPL2 (2018) review

2018

Cree XP-L2 LED

1480 lm output

30420 cd intensity

1 x 21700 Li-Ion battery

The Jetbeam BC25 XPL2 (BC25XPL2) released in 2018. It uses Cree XP-L2 LED, SMO reflector and 1 x 21700 Li-Ion battery. The powerful emitter in this flashlight provides up to 1480 lm output, 30420 cd intensity, and a beam distance of 349 m.

This light has 4 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available. The BC25 XPL2 flashlight is rechargeable easily via USB port.

Table of contents:

Jetbeam BC25 XPL2 specifications
Jetbeam BC25 XPL2 pictures
Jetbeam BC25 XPL2 comparisons

Jetbeam BC25 XPL2 (BC25XPL2) specifications

Brand	Jetbeam
Name	BC25 XPL2
Type	BC25XPL2
Rating	★★★★★ Rated 4/5 based on 1026 user votes.
Launch	2018
Form	flashlight

Body

The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.

Weight	134 g
Length	159 mm
Body diameter	27 mm
Head diameter	37.1 mm
Material	aluminium alloy with HAIII hard-anodized finish
Colors	black

System

The emitter of BC25 XPL2 manufactured by Cree, a US-based LED manufacturing company. The BC25 XPL2 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.

Emitter	Cree XP-L2 LED
Color temperature	6500 K
Reflector	SMO
Lens	toughtened AR coated glass
Switch	mechanical rear

Performance

The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.

Flux	1480 lm
Intensity	30420 cd
Throw	349 m
CD/LM factor	20.55

Software

The BC25 XPL2 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The BC25 XPL2 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.

Modes	4 modes
Mode memory	yes
Ramping mode	no
Strobe	yes
SOS/Beacon	no

Features

The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating. The BC25 XPL2 flashlight can be used as a powerbank to recharge a device, such as a mobile phone.

Battery	1 x 21700 Li-Ion battery
Battery indicator	yes
Charger port	USB Type-C
LVP	yes
Thermal regulation	yes
Protection	IPx8
AUX LEDs	no
Magnetic	no
Specials	powerbank function

Accessories

It comes with a battery. The battery must be fully charged before you first use your BC25 XPL2. The lanyard prevents accidental loss of the flashlight.

Package contents	2 x spare o-rings 21700 battery USB Type-C cable lanyard spare rubber cover

The performance of the Jetbeam BC25 XPL2 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Jetbeam BC25 XPL2, then don’t hesite and signal the problem to us.