Jetbeam RRT03 Raptor XPG3 (2020) review
The Jetbeam RRT03 Raptor XPG3 (RRT03XPG3) released in 2020. It uses 3 x Cree XP-G3 LEDs, TIR reflector and 1 x 18350 Li-Ion battery. The powerful emitter in this flashlight provides up to 1400 lm output, 5260 cd intensity, and a beam distance of 145 m.
It uses a TIR lens to form the beam pattern. This light has 3 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
Jetbeam RRT03 Raptor XPG3 (RRT03XPG3) specifications
- RRT03 Raptor XPG3
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 90 g
- 92.3 mm
- Head diameter
- 26.8 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of RRT03 Raptor XPG3 manufactured by Cree, a US-based LED manufacturing company. A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.
- 3 x Cree XP-G3 LEDs
- Color temperature
- 5000 K
- mechanical rear, rotary front
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 1400 lm
- 5260 cd
- 145 m
- CD/LM factor
The RRT03 Raptor XPG3 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The RRT03 Raptor XPG3 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- 3 modes
- Mode memory
- Ramping mode
The RRT03 Raptor XPG3 cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- 1 x 18350 Li-Ion battery
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
- blue light
It comes with a battery. The battery must be fully charged before you first use your RRT03 Raptor XPG3. The clip is useful to keep the light secured in your pocket. The lanyard prevents accidental loss of the flashlight.
- Package contents
- 18350 battery with microUSB
2 x spare o-rings
spare rubber cover
The performance of the Jetbeam RRT03 Raptor XPG3 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Jetbeam RRT03 Raptor XPG3, then don’t hesite and signal the problem to us.
Jetbeam RRT03 Raptor XPG3 (RRT03XPG3) pictures
If there’s information about the Jetbeam RRT03 Raptor XPG3 that you would like to see on this site, then write to our email@example.com address.