Jetbeam RRT01 Raptor XP-L (2019) review
The Jetbeam RRT01 Raptor XP-L (RRT01RX) released in 2019. It uses Cree XP-L HD LED, SMO reflector and 1 x 18350 Li-Ion battery. The powerful emitter in this flashlight provides up to 950 lm output, 7200 cd intensity, and a beam distance of 170 m.
This light does not have memory function. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
Jetbeam RRT01 Raptor XP-L (RRT01RX) specifications
- RRT01 Raptor XP-L
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 72.5 g
- 91 mm
- Body diameter
- 24.5 mm
- Head diameter
- 25.7 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of RRT01 Raptor XP-L manufactured by Cree, a US-based LED manufacturing company. The RRT01 Raptor XP-L has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Cree XP-L HD LED
- Color temperature
- 4000 K
- AR coated glass
- mechanical rear, rotary front
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 950 lm
- 7200 cd
- 170 m
- CD/LM factor
The ramping mode of the RRT01 Raptor XP-L is intuitive, and lets you seamlessly ramp the output up and down over almost the entire output range. The RRT01 Raptor XP-L is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- Mode memory
- Ramping mode
The RRT01 Raptor XP-L cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- 1 x 18350 Li-Ion battery
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
It comes with a battery. The battery must be fully charged before you first use your RRT01 Raptor XP-L. The clip is useful to keep the light secured in your pocket. The lanyard prevents accidental loss of the flashlight.
- Package contents
- 18350 battery
2 x spare o-rings
spare rubber cover
The performance of the Jetbeam RRT01 Raptor XP-L flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Jetbeam RRT01 Raptor XP-L, then don’t hesite and signal the problem to us.
Jetbeam RRT01 Raptor XP-L (RRT01RX) pictures
If there’s information about the Jetbeam RRT01 Raptor XP-L that you would like to see on this site, then write to us.