
Eagtac TX3V (2019) review
The Eagtac TX3V (TX3V) released in 2019. It uses Cree XHP70.2 LED, SMO reflector and 1 x 21700 Li-Ion battery. The powerful emitter in this flashlight provides up to 3550 lm output, 11500 cd intensity, and a beam distance of 214 m.
This light has 5 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available. The TX3V flashlight is rechargeable easily via USB port.
Table of contents:
Eagtac TX3V (TX3V) specifications
- Brand
- Eagtac
- Name
- TX3V
- Type
- TX3V
- Rating
- Launch
- 2019
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 114 g
- Length
- 142.8 mm
- Body diameter
- 25.4 mm
- Head diameter
- 33 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
System
The emitter of TX3V manufactured by Cree, a US-based LED manufacturing company. The TX3V has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Emitter
- Cree XHP70.2 LED
- Color temperature
- 5000 K, 6500 K
- Reflector
- SMO
- Lens
- AR coated glass
- Switch
- dual electronic side
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 3550 lm
- Intensity
- 11500 cd
- Throw
- 214 m
- CD/LM factor
- 3.24
Software
The TX3V has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The TX3V is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.
- Modes
- 5 modes
- Mode memory
- yes
- Ramping mode
- no
- Strobe
- yes
- SOS/Beacon
- no
Features
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating. The TX3V is magnetic so that the flashlight can be attached to some metallic surfaces. The TX3V flashlight can be used as a powerbank to recharge a device, such as a mobile phone.
- Battery
- 1 x 21700 Li-Ion battery
- Battery indicator
- yes
- Charger port
- USB Type-C
- LVP
- yes
- Thermal regulation
- yes
- Protection
- IPx8
- AUX LEDs
- no
- Magnetic
- yes
- Specials
- powerbank function
Accessories
It comes with a battery. The battery must be fully charged before you first use your TX3V. The package includes a holster to safely store your flashlight. The lanyard prevents accidental loss of the flashlight.
- Package contents
- 2 x spare o-rings
21700 battery
USB Type-C cable
lanyard
nylon holster
The performance of the Eagtac TX3V flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Eagtac TX3V, then don’t hesite and signal the problem to us.
Eagtac TX3V (TX3V) pictures

If there’s information about the Eagtac TX3V that you would like to see on this site, then write to us.