
Eagtac DX3L (2019) review
The Eagtac DX3L (DX3L) released in 2019. It uses Cree XHP50.2 LED, SMO reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 2500 lm output, 7225 cd intensity, and a beam distance of 170 m.
This light has 5 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available. The DX3L flashlight is rechargeable easily via USB port.
Table of contents:
Eagtac DX3L (DX3L) specifications
Brand | Eagtac |
---|---|
Name | DX3L |
Type | DX3L |
Rating | |
Launch | 2019 |
Form | flashlight |
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
Weight | 108 g |
---|---|
Length | 131 mm |
Body diameter | 22 mm |
Head diameter | 22.5 mm |
Material | aluminium alloy with HAIII hard-anodized finish |
Colors | black |
System
The emitter of DX3L manufactured by Cree, a US-based LED manufacturing company. The DX3L has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
Emitter | Cree XHP50.2 LED |
---|---|
Color temperature | 5000 K, 6500 K |
Reflector | SMO |
Lens | AR coated glass |
Switch | electronic side, mechanical rear |
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
Flux | 2500 lm |
---|---|
Intensity | 7225 cd |
Throw | 170 m |
CD/LM factor | 2.89 |
Software
The DX3L has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The DX3L is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.
Modes | 5 modes |
---|---|
Mode memory | yes |
Ramping mode | no |
Strobe | yes |
SOS/Beacon | no |
Features
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
Battery | 1 x 18650 Li-Ion battery |
---|---|
Battery indicator | yes |
Charger port | microUSB |
LVP | yes |
Thermal regulation | yes |
Protection | IPx8 |
AUX LEDs | no |
Magnetic | no |
Accessories
The package includes a holster to safely store your flashlight. The clip is useful to keep the light secured in your pocket.
Package contents | 2 x spare o-rings clip microUSB cable nylon holster |
---|
The performance of the Eagtac DX3L flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Eagtac DX3L, then don’t hesite and signal the problem to us.
Eagtac DX3L (DX3L) pictures

Eagtac DX3L (DX3L) comparisons
According to our statistics, the Eagtac DX3L flashlight was most often compared on our site with the following flashlights.

Eagtac DX3L

Acebeam TK18 CU Samsung

Eagtac DX3L

Foursevens Quark QK16L MKIII

Eagtac DX3L

Seeknite SD05

Eagtac DX3L

Seeknite SD03
If there’s information about the Eagtac DX3L that you would like to see on this site, then write to us.